Sega Fix Cyanoacrylate Adhesives (also called instant adhesives or super glue) cure by reacting to very small amounts of moisture on the surface of the components being bonded. That’s it – no ovens, no mixing, no specialty curing equipment – they simply cure from the residual moisture naturally occurring on the surface of the components. Sega Fix recognizes that in applications such as wire tacking and tamper proofing the adhesive is not compressed between two surfaces. For this type of application where the adhesive is exposed, activators are available. Simply spray the activator on the exposed cyanoacrylate to instantly cure it. Cyanoacrylate activators can also be used on very dry or acidic parts or to facilitate cure prior to wicking into porous substrates.
• Gap fill ranges for cyanoacrylates are 0.015mm (0.006″) to 0.5mm (0.02″).
• Temperature resistance ranges from -55 to +250°C (-55 to +482°F).
• Viscosity ranges from wicking grade to thixotropic no flow gel
Sega Fix Cyanoacrylates are ideal for bonding materials such as metal, rubber, composite, plastic, silicone and many more substrates.
New formulations continue to eliminate design challenges encountered by engineers trying to bond difficult plastics such as polypropylene, polyethylene, PTFE, and other polyolefins.
It’s high performance industrial cyanoacrylate adhesives that are available provide very fast set times, a range of viscosity choices as well as non-blooming / low odor formulations, and products with very high temperature resistance.
• Metal Bonding
• Plastic Bonding
• Low Odor – Non-Blooming
• Surface Insensitive – for Acidic Surfaces
• High Temperature Resistant
• Toughened – for Improved Impact Resistance
1) 20 GR
2) 50 GR
3) 20 KG IN PLASTIC GALLONS